Water-Damaged Floor Replacement in Wylie, TX & DFW
After a slab leak, burst pipe, or water heater or appliance leak, we tear out the ruined flooring and install new floors once the leak is fixed and the area is dry — with a detailed written estimate.
Short answer: At Home Flooring Solutions replaces floors damaged by leaks in homes across Wylie, Plano, Garland and DFW. New flooring is priced per square foot installed, the same as any other install, with removal and any subfloor repair listed separately on a free written estimate.
One thing up front, because it matters on the day water is on your floor: water extraction and drying come first, usually from a water mitigation company or your plumber, and they have to be finished before any new floor goes in. Our part is removing the damaged flooring and installing the new floor once the leak is fixed and the area is dry. If water is still on the floor, call us: we try to get someone out the same day or next day to look at it, and we can measure and quote while it dries.
If Water Is on the Floor Right Now
- Shut off the water at the fixture, or at the main if you cannot find the source.
- Call a plumber to find and repair the leak. For a suspected slab leak, that means a leak-detection plumber.
- Call a water mitigation company to extract the water and dry the structure.
- Take photos and video of the damage before anything is torn out.
- Then call us to measure and quote the replacement floor.
Where the Water Usually Comes From in DFW Homes
Slab leaks
Supply lines run through and under the slab in most DFW homes. North Texas clay swells and shrinks with the seasons and moves the slab with it, which stresses those pipes. A slab leak often shows up first as a warm spot, a damp patch of carpet, or flooring lifting in one area.
Burst pipes in a hard freeze
Pipes in exterior walls and attics are the ones at risk when a deep freeze reaches North Texas. When one splits, water usually runs across finished floors for hours before anyone finds the shutoff.
Water heaters
Tank water heaters in garages, closets and attics eventually leak. One in an interior closet can soak the floor of every room around it, and the damage often travels under the flooring before it shows.
Appliance and fixture lines
Dishwasher supply lines, ice-maker lines behind the fridge, washing machine hoses and toilet supply lines. Slow drips here do damage out of sight for weeks.
Attic AC drain lines
Many DFW homes have the air handler in the attic. A clogged condensate line or overflowing drain pan sends water through the ceiling and onto the floor below.
When the Floor Has to Come Out
Hardwood
Water makes boards cup (edges higher than the middle). Caught quickly, many flatten as they dry. Black or grey staining means water sat long enough to soak through the board, and those boards need replacing. See hardwood floor repair for the repair-or-replace call.
Laminate
Standard laminate has a fiberboard core. Once the edges swell, they do not go back down. Swollen laminate gets replaced.
Luxury vinyl plank
The plank itself is waterproof, but water gets under it through seams and edges and sits on the slab or subfloor with nowhere to go. It has to come up so the floor underneath can dry. Undamaged click planks can sometimes go back down; glue-down plank usually cannot.
Carpet and pad
The pad soaks up water like a sponge and is normally replaced. Whether the carpet itself can be saved depends on the water source and how long it sat — your mitigation company makes that call while drying the room. If it cannot, we install new carpet.
Tile
Tile itself is rarely damaged by water. On a slab it often survives a leak. On a wood subfloor upstairs, water underneath can rot the subfloor and loosen tiles. Tiles that sound hollow when tapped are the usual sign.
If the damage is a few hardwood boards rather than a whole room, our hardwood floor repair service may be the cheaper answer. If the leak was in a bathroom and only the floor is affected, see bathroom flooring.
The Leak Fixed and the Floor Dry, Before Anything New Goes Down
The most common way a replacement floor fails is being installed too soon. A slab can feel dry on the surface and still be releasing moisture underneath; a plywood subfloor can look fine and be soft at the edges. New flooring over that traps the moisture, and the damage starts again under a brand-new floor.
- Leak confirmed repaired. Make sure your plumber has found and fixed the source before new flooring goes in. A floor installed over an unfixed leak will be damaged again.
- Moisture readings. Before a new hard floor goes down, the slab or subfloor gets a moisture check, and the install waits until the readings are right for the flooring you picked.
- Slab patches. A slab leak repair often means the plumber broke out a section of concrete to reach the pipe. That patch has to cure and be leveled flush before a floor can go over it.
- Subfloor repair. On second floors and pier-and-beam homes, soft or delaminated plywood comes out and is replaced. We show you and price it before we continue, never after the new floor is down.
For more on what proper prep involves, see our guide to preparing a subfloor for new flooring.
Match the Old Floor, or Replace the Whole Area?
Floating LVP and laminate are usually laid as one continuous floor through the kitchen, living room and halls, with no seam at the doorways. A leak in the kitchen damages a section of that one floor.
- Same product still available: we can often replace the damaged section and tie it in at a natural break. Leftover boxes in the garage or a closet help.
- Product discontinued: LVP and laminate lines change every few years. The choices are a deliberate transition strip at a doorway, or replacing the whole connected area so it is one floor again.
- Hardwood: new boards can be woven into existing ones, then the area is sanded and refinished so the color blends. See hardwood refinishing.
We price each option at the estimate so you can decide with real numbers. Bring a piece of the damaged floor to our Wylie showroom and compare it against samples side by side; no appointment needed.
Choosing a Floor That Handles the Next Leak Better
If you are replacing a floor anyway, it is worth choosing one that tolerates the next dishwasher or water heater leak better. Rigid-core LVP and SPC are waterproof through the plank, porcelain tile does not care about water at all, and waterproof-rated laminate holds up far better than the standard kind. None of them stops water getting underneath, but they survive being dried out far better than wood or standard laminate. Our waterproof flooring page compares them.
On a North Texas slab, also consider how the floor handles foundation movement: floating LVP tolerates it well, and tile needs crack-isolation prep. Our guide to the best flooring for foundation movement goes through the options.
Your Written Estimate
If you're filing a claim, we give you a detailed written estimate (materials, square footage, removal, installation) you can share with your adjuster.
Replacement flooring is priced the same way as any other install. These are our 2026 installed ranges per square foot; removal of the damaged floor and any subfloor repair are listed as separate lines.
| Replacement floor | Installed, per sq ft |
|---|---|
| Luxury vinyl plank (LVP) | $3–$10 |
| Laminate (waterproof-rated recommended) | $3–$7 |
| Carpet | $3–$10 |
| Engineered hardwood | $6–$14 |
| Solid hardwood | $8–$21 |
| Tile | $7–$15 |
Furniture moving is free on our flooring installs, and special financing on approved credit is available.
What Hidden Water Damage Looks Like
Leaks rarely stay where they start. In a McKinney shower rebuild, a leak behind the surround had done its damage inside the wall long before anyone saw it. Floors are the same: water travels under flooring and along the slab, so it is worth checking how far it spread (soft spots, lifted edges, staining at the baseboards in nearby rooms) before you get a quote, so the estimate covers more than the patch you can see.
Water-Damaged Floor Replacement Across DFW
Water-Damaged Flooring FAQs
How fast can you come out if water is still on the floor?
For active water damage we try to get someone out the same day or next day, because the longer water sits, the less of the floor can be saved. Extracting water and drying the slab, subfloor and walls comes first, usually from a water mitigation company or your plumber, and the leak has to be fixed. Once the area is dry, we remove what is ruined and install the new floor.
Can you give me an estimate for my insurance adjuster?
If you're filing a claim, we give you a detailed written estimate (materials, square footage, removal, installation) you can share with your adjuster.
Do I have to replace the floor in every connected room?
Not always, but often more than people expect. Floating floors like LVP and laminate usually run continuously from room to room with no break at the doorways, so the damaged section is physically part of one large floor. If the same product is still available, a repair can stop at a sensible line. If it is discontinued, the choices are a deliberate transition at a doorway or replacing the whole connected area. We lay out each option and price it at the estimate.
Can water-damaged hardwood be saved instead of replaced?
Sometimes. Boards that cupped from a leak that was caught quickly can flatten as they dry, and the right move is to wait several weeks for the floor to stabilize before deciding. Boards with black staining or a soft, delaminated subfloor underneath need to come out. Our hardwood floor repair page covers how we decide between repair and replacement.
How soon can the new floor go in?
When the leak is repaired and moisture readings on the slab or subfloor say it is dry enough for the flooring you chose. Putting a new floor over a damp slab or subfloor is how the same damage happens twice. We respond within 1 business day to set up the free estimate, and we schedule the install around the readings, not the calendar.
Get a Written Estimate for Your Replacement Floor
We respond within 1 business day. We'll measure, check that the slab or subfloor is dry, and itemize materials, square footage, removal and installation.

