Skip to main content

Flooring Installation in Irving, TX

LVP, hardwood, laminate, tile and carpet for central Irving's older houses, the Las Colinas and Valley Ranch villages, and the city's condos and rentals. Free in-home estimate and a written quote.

Who Installs Flooring in Irving, TX, and What Does It Cost?

At Home Flooring Solutions is a family-owned flooring company with a walk-in showroom at 1001 Alanis Dr in Wylie, and we install floors in Irving: luxury vinyl plank, laminate, engineered and solid hardwood, tile and carpet, plus stairs and hardwood refinishing. In Irving, the cost drivers are testing or covering old flooring in pre-1980 central Irving and sound-control underlayment in condos. In North Texas, installed prices run about $3–$10 per square foot for LVP, $3–$7 for laminate, $3–$10 for carpet, $6–$14 for engineered hardwood, $8–$21 for solid hardwood and $7–$15 for standard tile; refinishing existing hardwood runs about $3–$8. As an example of the arithmetic, 900 square feet of LVP comes to about $2,700–$9,000 before stairs, tear-out and underlayment. The estimate is free and there is no trip fee: we measure in your home and give you an itemized written quote. Call (945) 208-5467. Se habla español.

Irving is farther out than our core Collin County cities, so here are the numbers. The showroom is about 29 miles from Valley Ranch and Las Colinas and about 33 miles from central Irving: roughly 42 to 47 minutes without traffic by way of LBJ Freeway (I-635), and longer at weekday rush hour, when I-635 traffic varies widely. You can see samples at the showroom first, or we bring them to the estimate. We reply to estimate requests within one business day.

Irving's housing splits three ways: 1950s–70s houses in central Irving, houses in the Las Colinas villages and Valley Ranch built from the 1960s into the 2010s, and a large stock of condos and apartments. Each raises a different question before anything is installed.

What Irving's Housing Looks Like

Irving went from farm town to suburb in the 1950s, when developers bought farmland for post-war housing. The population went from about 2,600 in 1950 to about 46,000 in 1960. Las Colinas followed on the north side from the 1970s, and Valley Ranch, north of I-635, from the 1980s.

The Census Bureau's 2024 American Community Survey counts 103,492 housing units in Irving. About 34% were built before 1980, and the median home was built in 1987. Only about 38% are single-family detached houses, while about 41% are in buildings with ten or more units. About 64% of occupied homes are rented. The city is about 256,700 people (2020 Census) and sits in Dallas County.

The ZIP codes show where each kind of housing is:

Irving ZIP codes by median year built and housing type, ACS 2020–2024
ZIPAreaMedian year builtHousing
75060Central and south Irving197469% single-family detached; 65% owner-occupied
75061Central Irving197842% single-family detached
75062Central Irving, incl. Plymouth Park197450% single-family detached
75038Las Colinas, south and west198739% of homes in 10–49-unit buildings
75039Las Colinas Urban Center201054% in 50+-unit buildings; 16% owner-occupied
75063Valley Ranch, Hackberry Creek199539% single-family detached

Source: U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, via Census Reporter.

What That Means for an Irving Flooring Job

Could the old floor in a 1970s Irving house contain asbestos?

The older core — ZIP codes 75060, 75061 and 75062, including Plymouth Park — has median build years of 1974 to 1978, and University Hills' custom homes in Las Colinas are mostly from the 1960s and '70s. In a house that age, old vinyl tile, the backing on sheet vinyl and the adhesive underneath can contain asbestos, and you can't tell by looking. EPA's guidance is not to sand it or try to level it, never to use a power stripper on it, and to consider installing the new floor over it. So there are two sound options: have it tested before anything comes up, or leave it in place and cover it where the new product and the floor heights allow. That decision belongs at the estimate, before tear-out is priced.

Painted trim is the other pre-1978 question. EPA's Renovation, Repair and Painting (RRP) rule applies to paid work in a pre-1978 home that disturbs more than 6 square feet of painted surface in a room, unless the paint has tested lead-free, and requires lead-safe work practices. Pulling baseboards for a new floor can cross that line, so decide at the estimate whether they come off or stay in place.

Two things are worth checking yourself before the estimate. Lift the carpet at a closet corner: if there is wood underneath, refinishing it ($3–$8 per square foot) may cost less than new flooring. And look along the base of the outside walls: foundation vents there usually mean a pier-and-beam house with a crawlspace rather than a slab, and a wood subfloor is prepared differently from concrete.

Condos and stacked units: get the sound rule first

With about four in ten Irving homes in buildings of ten or more units, many flooring jobs here have a neighbor underneath. Las Colinas' Urban Center (75039) is mostly newer mid- and high-rise apartments; Grand Treviso is a condo high-rise; Riverwalk Condos is one of Valley Ranch's sub-associations. Swap carpet for a hard floor in a unit like that and more footstep noise goes through to the unit below.

The building code's benchmark, which applies to new construction, is an impact-sound rating (IIC) of 50 between units, or 45 if measured in the finished building. Many condo associations write their own flooring rule on top of that, sometimes naming an approved underlayment. We don't know any Irving building's rule in advance, so get yours in writing before you choose a product and bring it to the estimate. In a high-rise, also ask management about elevator reservations and permitted work hours before install day is set; buildings commonly have both. Our flooring noise guide and LVP underlayment guide cover the options.

Do Las Colinas or Valley Ranch HOAs have to approve new floors?

Both are deed-restricted, but their review committees deal with the outside of the house. Hackberry Creek's HOA says interior changes don't need approval, and Valley Ranch's Architectural Review Committee reviews exterior changes. For a floor, the practical questions are getting through a gated entry and when crews may work, so check those with your HOA before you book an install date. (Condo associations inside these communities can be stricter; see above.)

Many homes here are old enough to be on at least their second floor covering. University Hills' custom homes are mostly from the 1960s and '70s, Hackberry Creek's homes date from the early 1990s, and Valley Ranch built out from the 1980s into the 2010s. On a replacement, the details that decide how it looks are where the new floor meets tile you're keeping, and whether doors need trimming for the new floor height. If you're doing more than one room, our guide to matching flooring through a house is worth reading first.

Concrete slabs on expansive clay

Dallas County sits on Blackland Prairie clay that shrinks in drought and swells when wet, and it moves slab foundations with it. Where a home sits on a slab, the concrete needs to be checked for flatness and cracks and tested for moisture to the flooring manufacturer's spec before wood or LVP is glued down or floated over it. In-situ relative humidity probes (ASTM F2170) are the industry's preferred test; the manufacturer sets the limit. See our subfloor prep guide and flooring for foundation movement.

Rentals and turnovers

Most Irving homes are rented, so a lot of flooring here is bought by landlords and condo owners between tenants. Owner-occupied homes are most common in 75060, where about 65% are owned, and least common in the Las Colinas ZIPs 75038 and 75039, at about 16 to 20%. For a turnover, a water-resistant floor and a short install window usually matter most: LVP is the common choice, and our rental flooring guide compares the alternatives. Furniture moving is free on install jobs, and special financing is available on approved credit.

Irving Neighborhoods

We cover all of Irving (ZIP codes 75038, 75039, 75060, 75061, 75062 and 75063).

Las Colinas
Master-planned on former ranch land starting in 1972. About 3,400 single-family homes plus apartments; deed-restricted, with exterior changes reviewed by the Las Colinas Association's Architectural Control Committee.
University Hills
One of the original Las Colinas villages: 500 custom home sites, most built in the 1960s and '70s. The oldest house dates from 1964, before the 1972 master plan. Some lots front the Las Colinas Country Club.
Hackberry Creek
A gated Las Colinas village in 75063. Its HOA dates to 1982, and listings show homes from the early 1990s.
Valley Ranch
About 2,400 acres north of I-635 with about 4,000 single-family homes, 22 multifamily properties, canals and greenbelts. Built out from the 1980s into the 2010s.
Grand Treviso
A condominium high-rise built in 2001 at 330 E Las Colinas Blvd, on the Mandalay Canal near Lake Carolyn.
Heritage District
Irving's original town center: a mix of old and new homes, walkable, with a TRE rail stop and the 1912 Heritage House.
Hospital District
An older residential area beside Baylor Scott & White Medical Center – Irving.
Plymouth Park
Central Irving (75061/75062). Local real-estate listings describe mostly 1950s and '60s ranch homes.

Other Las Colinas villages with their own associations include Cottonwood Valley, Fox Glen, Windsor Ridge, Mandalay Place, Fairway Vista, Quail Run, Country Club Place, University Park and Alto Vista.

What to Have Ready for an Irving Estimate

  • The year your home or building was built. Before 1980, plan for testing or covering the old floor rather than scraping it; before 1978, decide how the baseboards will be handled.
  • Your condo association's flooring rule, if you have one: any IIC or STC minimum, approved underlayment, or limits on hard flooring.
  • Access details: gate entry for Hackberry Creek and other gated villages; elevator booking and work hours for a high-rise.
  • Which rooms, and what stays. Tile you're keeping sets the transitions; stairs are priced per step.
  • Any water damage. The source has to be fixed and the area dry before a new floor goes in; see water-damaged floor replacement.

Flooring & Remodeling FAQs — Irving, TX

How much does flooring installation cost in Irving, TX?

Installed prices in North Texas run about $3–$10 per square foot for luxury vinyl plank, $3–$7 for laminate, $3–$10 for carpet with pad, $6–$14 for engineered hardwood, $8–$21 for solid hardwood and $7–$15 for standard tile. In Irving, the things most likely to change a quote are tearing out old flooring in the older central neighborhoods, sound-control underlayment in condos, and slab prep where the concrete is out of flat. We measure at a free in-home estimate and give you a written, itemized quote.

Can LVP go over the old vinyl tile in an older Irving house?

Often, if the old floor is a single layer that is firmly stuck down, flat and not cushioned; the new plank's installation instructions set the exact limits. In a house built before about 1980, covering the old vinyl in place is also what EPA suggests when it may contain asbestos, because it is never sanded, scraped or stripped. The trade-off is floor height, so check that doors, appliances and the transitions to other rooms still work with the extra thickness.

What underlayment does an Irving condo need under hard flooring?

Whatever your association's rules require, so get them in writing first. The building-code benchmark for floors between units in new construction is an impact-sound rating (IIC) of 50, and many associations write their own requirement on top of that, sometimes naming an approved underlayment. Bring the rule to the estimate and we'll quote an underlayment rated for it.

How far is Irving from your showroom?

The showroom at 1001 Alanis Dr in Wylie is about 29 miles from Valley Ranch and Las Colinas and about 33 miles from central Irving. Without traffic that is roughly 42 to 47 minutes by way of I-635; at weekday rush hour it takes longer, and traffic on I-635 varies widely. You can walk in to see samples during showroom hours, or we bring samples to the estimate.

Do you install flooring in Irving rental homes and condos between tenants?

Yes. Most Irving homes are rented, and for a turnover the priorities are usually a water-resistant floor and a short install. A single room is typically 1–2 days of on-site work and a whole home 3–7 days, once materials are in hand. If the unit is in a condo building, the association's flooring rule applies to a landlord the same as to an owner.

Also Serving Near Irving

Same crew, same pricing, no trip fee — these are the communities closest to Irving.

Irving sits in Dallas County— see everywhere we work across Dallas County.

Get a Free Flooring Estimate in Irving, TX

Tell us the year your home was built and any condo flooring rule, and we'll measure, check the slab, and give you an itemized written quote.

Free estimatesFree furniture movingSpecial financing on approved credit