Skip to main content

Kitchen Backsplash Installation in Wylie, TX & DFW

Subway, mosaic, large-format and stone-look backsplash tile, installed with clean cuts around every outlet and window, the right grout, and sealing where it is needed.

Short answer: At Home Flooring Solutions installs kitchen backsplash tile in Wylie, Plano, Garland and across DFW, on its own or as part of a countertop or kitchen remodel. Most backsplashes take 1–2 days, and each one is quoted per job, in writing, at a free in-home estimate.

A backsplash is a small area with a lot of visible detail. Every outlet, window edge and cabinet end is a cut someone will look at from three feet away while cooking. The tile choice matters, but how it is laid out and finished is what makes it look built-in rather than added on.

Backsplash Tile Options

Subway tile

A classic that suits most DFW kitchens, and no longer limited to the small 3×6. Classic 3×6 or longer 2×8 and 4×12 shapes, laid in running bond, vertical stack or herringbone. Grout color does most of the work: white on white reads quiet, a dark grout shows the pattern.

Mosaic

Small tiles on mesh sheets: marble hexagons, linear glass-and-stone blends, penny rounds. Beautiful, but every sheet has to be aligned so the seams between sheets disappear, and there are many more grout lines to seal and keep clean.

Large-format porcelain

12×24 and larger, including slab-look pieces that run from counter to cabinet with very few grout lines. The wall has to be flat, and big tiles are heavy and less forgiving around outlets and windows, so layout is planned before the first cut.

Natural stone and stone-look

Real marble, travertine and slate have natural variation and need sealing. Porcelain made to look like stone gives you the veining without the sealing and is far less likely to stain behind a busy cooktop.

For what DFW kitchens are choosing this year, see our 2026 backsplash tile trends. You can also see large-format porcelain and stone-look tile in person at our Wylie showroom, no appointment needed.

Backsplashes in Kitchens We Have Worked On

Grey-and-white marble-look hexagon mosaic backsplash running up to the range hood, white shaker cabinets and white countertops, kitchen by At Home Flooring Solutions in Frisco, TX
Frisco, TX
White subway tile backsplash with grey grout between grey shaker cabinets and a white countertop, kitchen by At Home Flooring Solutions in McKinney, TX
McKinney, TX
Waterfall-edge island and countertops with a linear glass-and-stone mosaic backsplash behind a gas range, kitchen by At Home Flooring Solutions in McKinney, TX
McKinney, TX

What Is Included

  • Removing the old backsplash tile where needed, itemized as its own line on your written quote
  • Wall prep: patching, flattening high spots, and making sure the surface is sound
  • Layout planned around the range, sink and window so cut pieces are balanced, not slivers
  • Cutting around outlets, switches, window returns and under-cabinet lighting
  • Outlet and switch box extenders so cover plates sit flush on the tile
  • Finished edges with metal trim or bullnose where the tile stops
  • Grout in your color (sanded, unsanded or epoxy), and caulk at the countertop and corners
  • Sealing where the tile or grout needs it, and cleanup before we leave

The Prep Nobody Sees

Outlets and switches. A backsplash adds tile and thinset to the wall, so every outlet and switch ends up recessed behind the new surface. We install box extenders to bring them forward so the cover plate sits flat on the tile, and we plan every cut around a box before the first tile is set, because a cut that is off by a quarter inch shows every time the cover plate goes back on.

Windows. A window over the sink needs the tile to turn the corner cleanly or stop at a finished edge. We decide which before setting the first row, because it changes where every other cut lands.

Where the tile stops. Under the upper cabinets, at the end of the counter run, and behind the range hood, where many people take the tile to the ceiling. Each end needs a finished edge: a metal trim profile or bullnose piece, not a raw cut.

Walls that are not flat. Drywall in many DFW homes has bows and humps, and large tiles show every one of them. We check the wall with a straightedge and fix the high spots before tiling.

Grout, Caulk and Sealing

Grout color changes the look of the same tile more than anything else. Matching grout lets the tile read as one surface; contrasting grout makes the pattern the feature. Our grout color guide walks through the choice. Behind a stove, darker or epoxy grout hides cooking splatter far better than bright white cement grout.

Cement grout is porous and gets sealed; epoxy grout does not need sealer. Natural stone tile gets the stone sealed too. The joint along the countertop and in the inside corners is caulked, not grouted, so it can flex without cracking. DFW's hard water leaves mineral haze on grout behind the sink over time; our tile and grout care guide covers how to deal with it.

Pairing a Backsplash With Your Countertops

The backsplash and the countertop are read together, so choose them together. A heavily veined quartz or granite usually looks best with a quiet backsplash; a plain white or solid counter can carry a patterned mosaic or a bold color. Bring a countertop sample or photo when you pick tile, and we will put them side by side.

When counters are being replaced, order matters: the cabinets are leveled, the stone is templated and installed, and then the backsplash is set so it finishes down to the stone. Tiling first and setting counters against the tile leaves gaps. Because we do countertop installation, tile and full kitchen remodeling with one crew, that sequence stays in one schedule.

Your quote is itemized and in writing, and special financing on approved credit is available on qualifying projects.

Backsplash Installation FAQs

How long does a kitchen backsplash installation take?

Most kitchen backsplashes take 1–2 days: tile set on the first day, grout once the thinset has cured, then caulk and sealing where the tile needs it. Large-format tile and detailed mosaics around a window or range hood can take longer. We give you the schedule with the quote.

Can you install a backsplash without remodeling the whole kitchen?

Yes. A new backsplash on its own is one of the most common ways to update a kitchen, and it is often paired with new countertops. If your counters are being replaced, the backsplash goes in after the new counters are installed so the tile finishes down to the stone.

What happens to my outlets and switches?

Cover plates come off and the tile is cut cleanly around each box. New tile and thinset build the wall out, so we install box extenders that bring each outlet and switch forward to sit flush with the new tile face. That way the cover plate sits tight against the wall instead of crooked, or with the device recessed behind the tile.

Does a backsplash need to be sealed?

It depends on the materials. Glazed ceramic and porcelain tile do not need sealing, but standard cement grout does, and natural stone like marble or travertine needs the stone sealed as well. Epoxy grout does not need sealer. We tell you which applies to the tile and grout you choose and seal what needs it before we leave.

Should the grout line meet the countertop?

No. Where the backsplash meets the countertop, and at inside corners, the joint should be filled with color-matched caulk rather than grout. Those are change-of-plane joints where two surfaces move slightly against each other, and grout cracks there. It is a small detail that separates a backsplash that stays clean from one with a cracked line along the counter.

Get a Free Backsplash Estimate

We'll measure the wall, look at your counters and outlets, and leave a written quote for the tile you pick — no pressure, no surprise add-ons.

Free estimatesFree furniture movingSpecial financing on approved credit